EGP229
Brand Name: Huawei
Model Number: SUN2000-5/6/8/10 KTL-M1
Rated Input Voltage: 600V
Rated Output Voltage: 220 Vac/ 380 Vac, 230 Vac/ 400 Vac, 3W / N+PE
Maximum Output Current: 15A
Output Voltage Frequency: 50 Hz / 60 Hz
Size: 525 x 470 x 166 mm
Weight: 17KG
Brand Name: Huawei
Model Number: SUN2000-5/6/8/10 KTL-M1
Rated Input Voltage: 600V
Rated Output Voltage: 220 Vac/ 380 Vac, 230 Vac/ 400 Vac, 3W / N+PE
Maximum Output Current: 15A
Output Voltage Frequency: 50 Hz / 60 Hz
Size: 525 x 470 x 166 mm
Weight: 17KG
| Brand | On Grid |
|---|
Yaskawa GA700 Series AC Inverter for 110kW (150HP) 400V 3ph motor to 216A at high overload or 132kW (175HP) to 250A when Fan/Pump rated. Operates in VxF, Sensorless Vector or Full Closed-loop Vector control (with the optional encoder feedback card) and converts fixed frequency Three Phase 400V input to variable frequency Three Phase 400V to control a standard AC induction, permanent magnet or synchronous reluctance motor.
Size 7: 312mm Wide x 420mm Deep x 700mm High. IP20.
Weight: 71kg.
Overload: 150% x 60 seconds. High Overload. Overload: 110% x 60 seconds. Fan/Pump Rated. Speed Control Range: 0-590Hz. Braking: Built-in braking transistor for 100% Torque x 10 seconds every 100 seconds to 3.2 Ohm minimum external resistor (not supplied) - see the Resistor options linked below or use the 'Which Resistor' button on this page.
Includes removable Operator Keypad, 3 Analogue Inputs, 8 Digital Inputs, 1 Pulse Input, 2 Analogue Outputs, 1 Pulse Output, 4 Relay Outputs (1 x Fault Relay), terminals for MEMOBUS/Modbus RS485 Communications, terminals for dual channel SIL3 safe torque off (STO), 24V DC input to power the control unit when the main supply is disconnected. USB mini-B port for PC connection.
Input Current: 207A at High Overload, 248A when Fan/Pump rated. Input Voltage: 380-480V Three Phase -15% +10% at 50-60Hz ±5%. EMC Compliance: IEC EN 61800-3 Category C3 (Industrial). Disabled by default, can be enabled via screw. Cubicle mount. Rated 50°C ambient. Ventilation space in front: [not specified], above: 120mm, below: 120mm, at sides: 30mm. Heat Loss at max output: 2045W at High Overload, 2211W when Fan/Pump rated. Mounting via 4 x M10 bolts (not supplied) at rear on 218mm x 659mm centres.
Broadest voltage and power range
Support for driving single-phase 220V and three-phase 220V/380V pumps,the power
From 0.4kW to 110kW.
Easy to use :
The inverters automatically start or sleep only after being connected to solar panel
without any parameter setting.
Multiple protective measures
Including PV over-voltage protection, PV polarity reverse warning, auto derating against
Over-temperature etc, which can extend product's life.
Advanced MPPT algorithms
Ensure the solar power tracking efficiency reaches 99%.
Work in low voltage
Models of 2.2kW or less can be configured with the boost module, which can make the
Pump work in low voltage and reduce the cost by decreasing the number of solar panel.
Auto switch between solar and grid input
Implement auto switch between solar input and grid input, achieved 24-hour unattended work.
Remote monitor:
Support the GPRS module, which can remote monitor the inverter by using the APP.
Product for high level protection
Support cabinet product for IP54 protection level.
المراجعات
لا توجد مراجعات بعد.