عرض ⁦4⁩ من كل النتائج

Show sidebar

INVT Goodrive100-PV Solar Pumping Inverter

EGP0

Broadest voltage and power range

Support for driving single-phase 220V and three-phase 220V/380V pumps,the power

From 0.4kW to 110kW.

Easy to use :

 The inverters automatically start or sleep only after being connected to solar panel

without any parameter setting.

Multiple protective measures

Including PV over-voltage protection, PV polarity reverse warning, auto derating against

Over-temperature etc, which can extend product's life.

Advanced MPPT algorithms

Ensure the solar power tracking efficiency reaches 99%.

Work in low voltage

Models of 2.2kW or less can be configured with the boost module, which can make the

Pump work in low voltage and reduce the cost by decreasing the number of solar panel.

Auto switch between solar and grid input

Implement auto switch between solar input and grid input, achieved 24-hour unattended work.

Remote monitor:

Support the GPRS module, which can remote monitor the inverter by using the APP.

Product for high level protection

Support cabinet product for IP54 protection level.

انفرتر 600_Inverter Yaskawa-GA500-IP20-Size5B-01

EGP0

600_Inverter Yaskawa-GA500-IP20-Size5B-01

Highlights

  • No power programming
  • Intuitive keypad
  • Conformal coated (IEC 60721-3-3: 3C2, 3S2)
  • Up to 30% smaller than the competition
  • Current vector control, open loop
  • Induction motor (IM), permanent magnet motor (PM), or synchronous reluctance motor operation
  • SIL3 (IEC 62061), PLe (ISO 13849-1) safety ratings
  • Embedded Modbus communication
  • Wide variety of communication options
  • Variety of mounting methods (standard, IP20/UL Type 1, side-by-side, external heatsink, DIN rail)
  • Embedded 24 Vdc power supply
  • Maintenance monitors
  • Cooling fan replacement without tools
  • Optional LCD or Bluetooth keypad
  • Global certifications (CE, UL, cUL, TUV, RCM)
  • MTBF: 28 years
  • Short Circuit Current Rating (SCCR): 31 kA rms symmetrical
  • Common programming with all other Yaskawa drives
  • DriveWizard Industrial software for parameter management and start-up
  • DriveWizard Mobile application for smartphones and tablets
  • Function Block Diagram (FBD) programming via DriveWorksEZ™

انفرتر 600_Inverter Yaskawa-GA700-IP20-Size5B-01

EGP0

Yaskawa GA700 Series AC Inverter for 110kW (150HP) 400V 3ph motor to 216A at high overload or 132kW (175HP) to 250A when Fan/Pump rated. Operates in VxF, Sensorless Vector or Full Closed-loop Vector control (with the optional encoder feedback card) and converts fixed frequency Three Phase 400V input to variable frequency Three Phase 400V to control a standard AC induction, permanent magnet or synchronous reluctance motor.

Size 7: 312mm Wide x 420mm Deep x 700mm High. IP20.

Weight: 71kg.

Overload: 150% x 60 seconds. High Overload. Overload: 110% x 60 seconds. Fan/Pump Rated. Speed Control Range: 0-590Hz. Braking: Built-in braking transistor for 100% Torque x 10 seconds every 100 seconds to 3.2 Ohm minimum external resistor (not supplied) - see the Resistor options linked below or use the 'Which Resistor' button on this page.

Includes removable Operator Keypad, 3 Analogue Inputs, 8 Digital Inputs, 1 Pulse Input, 2 Analogue Outputs, 1 Pulse Output, 4 Relay Outputs (1 x Fault Relay), terminals for MEMOBUS/Modbus RS485 Communications, terminals for dual channel SIL3 safe torque off (STO), 24V DC input to power the control unit when the main supply is disconnected. USB mini-B port for PC connection.

Input Current: 207A at High Overload, 248A when Fan/Pump rated. Input Voltage: 380-480V Three Phase -15% +10% at 50-60Hz ±5%. EMC Compliance: IEC EN 61800-3 Category C3 (Industrial). Disabled by default, can be enabled via screw. Cubicle mount. Rated 50°C ambient. Ventilation space in front: [not specified], above: 120mm, below: 120mm, at sides: 30mm. Heat Loss at max output: 2045W at High Overload, 2211W when Fan/Pump rated. Mounting via 4 x M10 bolts (not supplied) at rear on 218mm x 659mm centres.

انفرتر Inverter pump VACON_100_LR

EGP0

VACON® 100 – versatile

Application: designed for control of pumps, fans, compressors, conveyors, drilling, mills, drums..
Control Perfomance: Open loop vector control (5-150% of base speed) Ramp times (acceleration and deceleration): 0.1-3000 s
Frame:  MR4 ÷ MR12
Overload:  110% / 150%
Power:  0.55 ÷ 800kW
Current: 3.7 ÷ 820A
Voltage: 208 ÷ 240VAC / 380 ÷ 500VAC / 525 ÷ 600VAC
Input: 2 x AI 6 x DI 10V, ref. 24V in
Output: 1 x AO 3 x RO 2 x RO + TI 2 x 24V out Built in modules: Modbus TCP/IP, BACnet IP, PROFINET, EtherNet/IP
Output Frequency: 0 ÷ 320Hz
Ambient Temperature: -10 ÷ 50°C
Braking Chopper: integrated
DC Choke: integrated
Emmisions: EMC class 2
Protection Class: IP21 / IP54
Dimensions (W X H X D): see data sheet
Weight: see data sheet
Approvals: SIL3, DNV -GL, BV, LR, ABS and RINA